Banner Board Stand - Double Upright, Height Adjustable, Black

A floor stand for a printed board - corflute, cardboard, foam board. Two uprights carry a rail at the top and a rail at the bottom, and the board sits in the channel on each one. Both faces of the board stay visible, so it reads from either side.

The rails are 30 cm across and take a board up to 6 mm thick. The board itself can be wider than the rails - the channels grip the top and bottom edges, and the sides simply overhang.

Two stands can be stood side by side to carry one wide board - one upright pair at each end. That is how a 1.2 m or wider banner board gets held without a frame around it.

The base is a 30 x 30 cm steel plate with a non-slip mat underneath. It ships flat and bolts together - the allen key and the screws are in the box. The whole stand weighs 3 kg.

For a single pole with a tilting arm instead, see the tilt adjustable POP stand or the premium tilt stand in black, gold or silver.

Questions & Answers

Q: What can it hold?
A: A printed board up to 6 mm thick - corflute, cardboard, foam board. The board slides into the channel on the top and bottom rails.

Q: Can the board be wider than the rails?
A: Yes. The rails are 30 cm and they grip the top and bottom edges; the sides overhang. For a really wide board, stand two of these side by side.

Q: How do I change the height?
A: Loosen the star knobs, slide the rails up or down the uprights, tighten them again. Overall height runs from 111 to 179 cm.

Q: Does it come assembled?
A: It ships flat and bolts together. The allen key and the screws are in the box.

More poster stands are in poster stands and floor sign holders.