A4 Clear Acrylic Sign Holder with Metal Legs - Portrait, Freestanding or Wall Mount

A4 clear acrylic sign holder for 210 x 297 mm sheets, in portrait. Two metal legs push through the two round holes near the bottom edge and stand the holder up on a counter, desk or reception table. The holder is one sheet of 1.5 mm clear acrylic folded over at the top, which gives two clear layers with the sign held between them. It is open along the bottom and both sides: slide the sign in from below or from the side, and it rests on the legs without dropping out. The sign can be changed with the legs left in place. Take the legs out and the same holder goes on a wall, either with screws through the two round holes or with the two double-sided adhesive pads that come with it.

Other sizes

A5 acrylic sign holder with legs All counter sign holders

Questions & Answers

Q: How does it stand up?
A: The two metal legs push through the two round holes near the bottom edge and rest on the counter behind the holder, so it stands on its own.

Q: How do I put the sign in?
A: Slide it in from the bottom or from either side. The top is the folded edge. The sign rests on the legs, so it does not slide out of the bottom, and you do not need to take the legs out to change it.

Q: Can I hang it on a wall instead?
A: Yes. Pull the legs out and turn the holder so the holes are at the top. Fix it with screws through the two round holes, or with the two double-sided adhesive pads that come with it.

Q: Are screws included?
A: No. The legs and the two double-sided adhesive pads are included; screws are not, because the right screw depends on the wall.

Q: Can it hold the sign in landscape?
A: No. This holder is portrait only.

Q: What size paper does it take?
A: A standard A4 sheet, 210 x 297 mm.

Q: How thick is the acrylic?
A: Each layer is 1.5 mm clear acrylic. The holder is one sheet folded at the top, so the sign sits between two layers.